Skip to menu

logo_publications.png

 

Refereed Journal Articles

  1. N. Satterlee, R. Jiang, E. Torresani, T. Grippi, A. Maximenko, M. P.F.H.L. van Maris, D. Giuntini, E. Olevsky, J. S. Kang, "Machine Learning-Driven Characterization of Anisotropic Microstructures in Powder-Based Additive Manufactured Metal Parts", Progress in Additive Manufacturing (accepted)
  2. Ghorbani, Maryam, Andrii Maximenko, Sheron Stephany Tavares, Elisa Torresani, and Eugene Olevsky. Robocast Hydroxyapatite Scaffolds: Structure, Mechanical Performance, and Bioactivity Tailored by Sintering. Journal of Materials Research and Technology (2026).
  3. Grippi, T., A. Maximenko, R. Jiang, D. Olumor, E. Torresani, and E. Olevsky. Rapid sintering for enhancing mechanical properties of cold-sprayed Al6061 and SS316L. Manufacturing Letters (2026).
  4. Patra, Swapnita, Dillip Bhoi, Dillip Kumar Panda, Rajendra Kumar, and Sarat Kumar Swain. "Lignocellulosic Biomass for Energy Transition: Past, Present, and Future." In Lignocellulosic Biomass to Biohydrogen: A Circular Economy and Sustainable Approach to Decarbonization, pp 539-560 (2026).
  5. Mulik, Swapnajit V., Mrunal M. Patil, Sonali P. Sadavar, Sagar D. Delekar, Rajendra K. Bordia, and Dillip K. Panda. "Metal‐Organic Framework‐Based Supercapacitors: A Comprehensive Review." Advanced Science e19519 (2026)
  6. Sarker, Debanjan, Rajendra K. Bordia, and Ulf D. Schiller. "Numerical modeling of electrochemical transport and discharge mechanisms in hierarchically porous lithium-ion electrodes." Materials Advances 7, no. 4: 2362-2378. (2026)
  7. Zago, Marco, Thomas Grippi, Elisa Torresani, Matteo Perina, Eugene A. Olevsky, and Ilaria Cristofolini. Friction-Induced Distortion in Binder Jetted 316L Stainless Steel: Experimental Analysis, Simulation, and Compensation Strategy. Additive Manufacturing Letters (2025): 100352.
  8. Grippi, Thomas, Andrii L. Maximenko, Elisa Torresani, and Eugene A. Olevsky. "Ultra-rapid, pressureless, and optically instrumented manufacturing of high-performance ceramics." Journal of the European Ceramic Society (2025): 117992.
  9. Grippi, T., Maximenko, A., Rios, A.C., Jiang, R., Torresani, E. and Olevsky, E., 2025. Powder bed non-uniformity investigations via discrete element modelling for binder jetting technology. Powder Metallurgy, p.00325899251361213.
  10. Opetubo, Oriyomi, Ting Shen, Rajendra Bordia, and Dilpuneet S. Aidhy. Fundamental Understanding of Oxygen Vacancy Energetics In Rocksalt Mg (CuNiCoZn) O High Entropy Oxide From DFT And Experiments. Acta Materialia (2025): 121291 
  11. Sabu, Ummen, Matej Balaz, M. Balasubramanian, and Rajendra K. Bordia. Eggshell membrane: A proteinaceous template for the development of hierarchical ceramics. Ceramics International 51 Issue 16, Part A  (2025): 21135-21161
  12. Geng, Xiao, Jianan Tang, Ningxuan Wen, Jason Shaw, Siddhartha Sarkar, Lionel Vargas‐Gonzalez, Nicholas Ku, Jianhua Tong, Rajendra K. Bordia, Dongsheng Li, Fei peng. Machine‐Learning‐Based, Feature‐Rich Prediction of Alumina Microstructure from Hardness. Advanced Intelligent Discovery (2025): 202400022.
  13. Torresani, E., Cabo Rios, A., Grippi, T., Maximenko, A.L., Zago, M., Cristofolini, I., Olevsky, E.A., Sintering Model for Predicting Distortion of Additively Manufactured Complex Parts, Rapid Prototyping Journal (2024), 30(11), pp.369-383.
  14. Webber, Kyle G., Oliver Clemens, Vincenzo Buscaglia, Barbara Malič, Rajendra K. Bordia, Tobias Fey, and Udo Eckstein. Review of the opportunities and limitations for powder-based high-throughput solid-state processing of advanced functional ceramics. Journal of the European Ceramic Society 44, no. 15 (2024): 116780 
  15. Kauermann, Richard, Brian D. Flinn, Rolf Janssen, Nils Claussen, Komalakrushna Hadagalli, and Rajendra K. Bordia. Stabilization of porosity in reaction bonded aluminum oxide (RBAO) by coarsening in a reactive atmosphere. Ceramics International 50, no. 19 (2024): 37395-37401. 
  16. Zhang, Zhao, Hai Xiao, Rajendra K. Bordia, and Fei Peng. Elastic Modulus Measurement at High Temperatures for Miniature Ceramic Samples using Laser Micro-Machining and Thermal Mechanical Analyzer, Materials 17, no. 18 (2024): 4636. 
  17. Grippi, T., Torresani, E., Maximenko, A.L. and Olevsky, E.A., Spark Plasma Sintering of Boron Carbide (B4C): From Characterization to Finite Element Modeling of Sintering, Journal of the European Ceramic Society (2024): p.116700
  18. Cabo Rios, A., Mishurova, T., Cordova, L., Persson, M., Bruno, G., Olevsky, E., Ex-situ characterization and simulation of density fluctuations evolution during sintering of binder jetted 316L, Materials & Design, 238 (2024): 112690 (2024)
  19. Grippi, T., Torresani, E., Rios, A.C., Maximenko, A.L., Zago, M., Cristofolini, I., Molinari, A., Bordia, R.K. and Olevsky, E.A., Mitigation of gravity-induced distortions of binder-jetting components during rotational sintering, Additive Manufacturing Letters, 10 (2024): 100215.
  20. Torresani, E., Park, C., Grippi, T., Haines, C. and Olevsky, E.A., Complex Shape Transparent Al2O3 Fabricated by Integrated Spark Plasma Sintering-Additive Manufacturing Technology, Ceramics International, 50 (2024): 37332-37340.
  21. Grippi, T., Torresani, E., Maximenko, A.L. and Olevsky, E.A., Additive manufacturing-assisted sintering: Low pressure, low temperature spark plasma sintering of tungsten carbide complex shapes, Ceramics International, 50 (2024): 37228-37240
  22. Satterlee, N., Jiang, R., Olevsky, E., Torresani E., Zuo, X. and Kang, J. S., Robust Image-Based Cross-Sectional Grain Boundary Detection and Characterization using Machine Learning, Journal of Intelligent Manufacturing, (2024), 36(5), 3067-3095.
  23. Cabo Rios, A., Persson, M., Hryha, E., Olevsky, E., Phenomenological sintering model and experimental validation of gravity-induced distortions in binder-jetted stainless-steel components, Ceramics International, 50 (2024): 37268-37281.
  24. Satterlee, N., Torresani, E., Olevsky, E., Kang, J. S., Automatic Detection and Characterization of Porosities in Cross-Section Images of Metal Parts Produced by Binder Jetting using Machine Learning and Image Augmentation, Journal of Intelligent Manufacturing, 35 (2024): 1281-1303.
  25. Gowing, Sion, Ummen Sabu, and Rajendra K. Bordia. "Warm Pressing of Organosilicon Polymer Toward Monolithic Ceramics." Advanced Engineering Materials (2024): 2400103.
  26. Olumor, I.D., Wiśniewska, M., Torresani, E., Olevsky, E.A., Additive manufacturing and spark plasma sintering as effective routes for manufacturing of AISI 316L austenitic stainless steel-WC composites, Journal of Materials Research and Technology, 26 (2023): 3234-3244.
  27. Cabo Rios, A., Olevsky, E., Hryha, E., Persson, M., Bordia, R.K., Analytical models for initial and intermediate stages of sintering of additively manufactured stainless steel, Acta Mater., 249 (2023): 118822.
  28. Torresani E, Ischia G, Molinari A. Localized Defects in Cold Die-Compacted Metal Powders. Journal of Manufacturing and Materials Processing, 6(6) (2023):155.
  29. Park C, Torresani E, Haines C, Martin D, Olevsky EA. Transparent Al2O3 fabricated by energy efficient spark plasma sintering, J Mater Sci, 58 (2023): 11872–11885.
  30. Torresani E, Carrillo M, Haines C, Martin D, Olevsky E. Fabrication of powder components with internal channels by spark plasma sintering and additive manufacturing. Journal of the European Ceramic Society, 43(3) (2023):1117-26.
  31. Espinoza‐Ochoa, Irma Magaly, Héctor Camacho‐Montes, Yoanh Espinosa‐Almeyda, Claudia Alejandra Rodríguez‐González, and Rajendra Kumar Bordia. "The effectiveness of published continuum constitutive laws to predict stress‐assisted densification of powder compacts." Journal of the American Ceramic Society 106, no. 3 (2023): 1653-1667.
  32. Torresani, E., German, R., Huff, R., Olevsky, E.A., Influence of gravity on sintering of 3D-printed powder components, J. Am. Ceram. Soc., 105 (2022): 131-146.
  33. Olumor, I.D., Maximenko, A.L., Olevsky, E.A., Effect of laser dwell time on pore elimination in selective laser melting of metal matrix composites, Additive Manufacturing (2022)
  34. Satterlee, N., Torresani, E., Olevsky, E., Kang, J. S., Comparison of Machine Learning Methods for Automatic Classification of Porosities in Powder-based Additive Manufactured Metal Parts, The International Journal of Advanced Manufacturing Technology, 120 (2022): 6761–6776.

Conference Proceedings

  1. Dhanankam, N., Kodangal, D., Bordia, R.K., Schiller, U.D. “Computational Microstructure Analysis of Sintered Ceramics.” In: Paszynski, M., Barnard, A.S., Zhang, Y.J. (eds) Computational Science – ICCS 2026 Workshops. Lecture Notes in Computer Science, vol. 16787, pp. 641–654. Springer, Cham (2026).
  2. N. Satterlee, E. Torresani, R. Jiang, M. P. F. H. L. van Maris, D. Giuntini, E. Olevsky, J. S. Kang, “Machine Learning-Enabled Characterization of 3D Particle Contacts from 2D Microstructural Images in Powder-Based Metal Additive Manufacturing", TMS 2026 155th Annual Meeting & Exhibition Supplemental Proceedings, Cham: Springer Nature Switzerland, 2026, pp. 569–583.

Conference Presentations

  1. N. Satterlee, E. Torresani, R. Jiang, M. P. F. H. L. van Maris, D. Giuntini, E. Olevsky, J. S. Kang, “Machine Learning-Enabled Characterization of 3D Particle Contacts from 2D Microstructural Images in Powder-Based Metal Additive Manufacturing”, 155th TMS Annual Meeting, San Diego, USA, March 15-19, 2026.
  2. N. Satterlee, X. Zuo, J. Chan, R. Jiang, E. Torresani, E. Olevsky, J. S. Kang, “A Multistep Machine Learning Model for Process Parameter Optimization in Powder-Based Additive Manufacturing,” 40th ASPE Annual Meeting, San Diego, USA, November 3-7, 2025.
  3. T. Grippi, R. Jiang, A. Maximenko, J. S. Kang, E. Torresani, Eugene Olevsky, Evaluation of Green State Anisotropy in Parts Produced by Binder Jetting, Via Machine Learning Enhanced Discrete Element Modelling, 2025 TMS Annual Meeting, Las Vegas, Nevada, USA, March 23-27, 2025.
  4. R. Jiang, T. Grippi, A. Maximenko, J. S. Kang, E. Torresani, E. Olevsky, Anisotropy in the Binder Jetting and Sintering Process of 316 Stainless Steel, 2024 TMS Annual Meeting, Orlando, Florida, USA, March 3-7, 2024.

Publications Under Review

  1. T. Grippi, E. Torresani, R. Jiang, A. Maximenko, D. Giuntini, M. v. Maris, J. Kang, N. Satterlee, R. Bordia, E. Olevsky, “Continuum Meso-Macro Multiscale Modeling of Anisotropy During Sintering Of Parts Produced Via Additive Manufacturing”, npj Advanced Manufacturing

Publications In Preparation

  1. N. Satterlee, R. Jiang, E. Torresani, T. Grippi, A. Maximenko, M.P.F.H.L. van Maris, D. Giuntini, E. Olevsky, J. S. Kang, Machine Learning-Driven Characterization of Anisotropic Microstructures in Powder-Based Additive Manufactured Metal Parts, submitted to Progress in Additive Manufacturing (2025).
  2. Grippi, T., Torresani, E., Jiang, R., Maximenko, A., Giuntini, D., van Maris, M.P.F.H.L., Kang, J., Saterlee, N., Olevsky, E., Meso-Macro Multiscale Modeling of Anisotropy during sintering of Parts Produced from Binder Jetting, submitted to npj Additive Manufacturing (2026).
  3. Deeksha Muralidar Kodangal, Elisa Torresani, Thomas Grippi, Eugene Olevsky, Rajendra K. Bordia, “Activation Energy of Densification of Alumina: Comparison of Different Formulations”, Submitted to Journal of the American Ceramic Society (2026).
  4. Nawraj Sapkota#, Gangadhar Jella, Lavanya Muthusamy, Apparao M. Rao, Ravindran Sujith, Dong Hou, Rajendra K. Bordia, Dillip Panda “Si-Rich SiOC–rGO Composites as Advanced Anodes for Lithium-Ion Batteries” Submitted to Batteries & Supercaps (2026)
  5. ” Rahul Bhise, Tapan Ping, Shantinarayan Rout, Nagapradeep Nidamanuri, A. W. Santhosh Kumar, Rajendra K. Bordia, Rojalin Sahu, Arif D. Sheikh, Bikash Kumar Jena Sushant P. Sahu and Dillip K. Panda “Comprehensive Compilation of Curvets in Carbon-Based Quantum Dots for Electrochemical Hydrogen Submitted to Small (2026)
  6. Samudrala Nagarani #, Sajib Kumar Mohonta, Nishanth Reddy Manda, Dong Hou, Rajendra K. Bordia, Chanchal Chakraborty, Ravindran Sujith, Dillip Panda “Sn/SiOC Composite Anodes for Lithium-Ion and Sodium-Ion Batteries: Synthesis, Structure, and Electrochemical Properties” Submitted to ACS-OMEGA (2026)
  7. Yukti Setia, Nikita Bhatt, Dong Hou, Deeksha Kodangal, Rajendra K. Bordia, Dillip K. Panda*, Malaya K. Sahoo “High-Entropy Materials for Electrochemical Energy Storage Device” Submitted to Energy and Environmental Science (2026)
  8. Zago, M., Grippi, T., Cabo Rios A., Torresani, E., Maximenko, A., Cristofolini, I., Olevsky, E.A., Sintering Compensation Strategies of 316L Pipe Tee Connectors Printed by Binder Jetting Additive Manufacturing, under preparation.